THE EASY CHOICE WHEN LUXURY, PERFORMANCE AND VALUE MATTER.
Over the river and through the neighborhoods, it’s off to fun we go. The Adventurer Sport 2+2 is as comfortable dropping kids off at baseball practice as it is scooting over to the park. Whatever challenges your day may hold, with the Adventurer Sport 2+2, you’ll have plenty of strength to conquer them.
- Features
- Specs
- Options
- Photos
General Information
Model
Adventurer Sport 2+2 (Gas)
Engine
Engine
Yamaha-built, low-emission single cylinder 60° incline OHV
Cooling system - Forced Cooling
Carburetion
Fuel system - Electronic injection
Fuel Capacity
5.8 US gal. (22 l)
Lubrication
Oil capacity - 1 qt. (1 l)
Air Filter
Two-stage, urethane-foam pre-cleaner, and high-capacity pleated paper cartridge
Measurements
Length
Overall - 108.9 in. (2,765 mm)
Height
Overall without suntop - 50 in. (1,270 mm)
Width
Overall - 50.9 in. (1,294 mm)
Weight
Dry with suntop - 905 lb. (411 kg)
Wheelbase
64.7 in. (1,643 mm)
Ground Clearance
Minimum - 5.5 in. (140 mm)
Operational
Brakes
Self adjusting rear drum
Suspension
Front - Tru-Trak II™ fully independent automotive-style strut
Rear - Unit swing arm with coil springs over hydraulic shock absorbers
Tires
20 x 10-8 (4-ply rating)
Seating
Capacity - 4 persons
Front - Seamless, fabric-backed vinyl bonded to pure, virgin foam contoured seat cushions and mated to a warp and moisture-resistant polypropylene bottom, strengthened with plated steel inserts
Rear - Hinged seating platform with vinyl covered seat bottom cushion and contoured backrest
Turning Radius
Minimum - 9.8 ft. (3.0 m)
Steering
Self-compensating double reduction helical rack-and-pinion, permanently lubricated with sealed, greaseless tie-rod ends
Speed
Maximum - 15 mph (24 km/h)
Other
Additional Colors
Glacier
Jasper Metallic
Moonstone Metallic
Onyx Metallic
Sandstone Metallic
Aqua Blue Metallic
Bluestone Metallic
Rich Brown Metallic
Frame
HybriCore™ Chassis features a robotic welded automotive ladder-style steel frame mated to a polypropylene structural floor. Frame is protected with a multi-step full-immersion phosphate treatment, electro-deposition epoxy-based coating, and an electrostatic applied polyester/urethane powder topcoat
Warranty
Standard 2-year limited